%, la densidad máxima de 2,55 g/cc con absorción de agua de 0,94%. A 1350° C, para la composición que tiene sílice 10% con alúmina 35% en peso. Se midió la resistencia mecánica y el comportamiento físico para todas las muestras de diferentes composiciones. Se utilizaron diferentes técnicas de caracterización como dilatometría, difracción de rayos X (XRD) y microscopía electrónica de barrido (SEM) para evaluar los cambios térmicos, estructurales y microestructurales debidos al aumento de la concentración de sílice en la alúmina en la composición base de la porcelana. Se prepararon muestras con diferentes formas y dimensiones mediante una prensa hidráulica a una presión de a 160 MPa con un tiempo de retención de 10 minutos. El presente estudio investiga el efecto de la adición de la concentración de alúmina y sílice sobre las propiedades físicomecánicas y eléctricas de los cuerpos de porcelana a alta temperatura de sinterización. Los aisladores de porcelana de alta resistencia eléctrica juegan un papel vital en la industria de la energía. The composition having silica 10 wt.% with alumina 35 wt.% sintered at 1350 ☌, has enormous potential to serve as a high strength refractory and a dielectric ceramic material for microwave applications. The highest dielectric value of 5.75 and minimum dielectric loss of 0.05 at a frequency (2–20 GHz) is achieved for the same composition with silica 10 wt.% of alumina 35 wt.% sintered at 1350 ☌. This sample also shows the highest value of bending and compressive strength of 129 ± 5 and 202 ± 5 MPa respectively.
![bricks n balls level 208 bricks n balls level 208](https://media.springernature.com/lw685/springer-static/image/art%3A10.1038%2F10677/MediaObjects/41594_1999_Article_BFnsb0799_628_Fig1_HTML.gif)
The sample with a composition having silica 10 wt.% of alumina 35 wt.% and sintered at 1350 ☌, shows the maximum density of 2.55 g/cc with water absorption of 0.94%. The measurement of mechanical strength and physical behavior were analyzed for all the samples prepared with different compositions of alumina and silica with varying sintering temperature (12 ☌).
![bricks n balls level 208 bricks n balls level 208](https://i.ytimg.com/vi/wJkcXWNnLNk/maxresdefault.jpg)
Different characterizations techniques such as dilatometer, X-ray diffraction (XRD), and scanning electron microscopy (SEM) used to evaluate the thermal, structural, and microstructural changes, respectively by increasing the concentration of silica (0–20 wt.%) and decreasing alumina (45–25 wt.%) concentration for the base composition of porcelain insulator. The pallets were prepared in different shapes and dimensions with the help of hydraulic press machine by pressing at 160 MPa for a period of 10-min. The present study investigates the effect of alumina and silica addition on the physico-mechanical and electrical properties of porcelain bodies over high sintering temperatures.
![bricks n balls level 208 bricks n balls level 208](https://i.ytimg.com/vi/zIwQyLuORO4/maxresdefault.jpg)
The high-strength electrical porcelain insulator plays a vital role in the power industry.